PS257 Pipe Sealant (With Teflon)
PS257
Pipe Sealant (With Teflon)
Akfix PS257 is a high viscosity and medium strength anaerobic pipe sealant. Thixotropic formulation reduces run-off and migration of the product before assembly.
Properties
- It can be easily applied to threaded joints and removed easily with hand tools.
- With its specialized formulation, PS257 can be used applications where high pressure proof or oil resistance is required.
- The product resists very high temperatures after full curing.
- Especially suitable for H-thick metal threaded joints according to EN 751-1 standard.
- The product fills high distance gaps and gives perfect results on wide-diameter (wider than 0.5mm) applications.
Application Areas
- Clean male and female threads before assembly with an absorbent tissue paper to remove any cutting oil.
- Apply the adhesive with a 360 turn to leading threads of the male and female fittings.
- Use an absorbent tissue paper to wipe off excess jointing compound in the direction of the thread.
- Assembly parts and hold on for 24 hours at 22-24°C to ensure full curing of jointing compound.
- For disassembly, use hand tools to remove mating parts. When it is hard to dissemble at room temperature, apply local heat until reaching 250°C and disassemble while hot. Then, remove any residual cured adhesive mechanically and clean parts with a proper solvent, acetone.
Packaging
| Stock Code | Product Code | Type | Volume | BoxQty |
|---|---|---|---|---|
| PS257_01 | - | Pipe | 50 ml | 120 |
Galleries
